Multimatic® 200 Multiprocess Welder

115/230 50/60HZ 1PH

219.14.907518

$3,100.00

  • STORE PICKUP
  • SHIPPING
1 IN STOCK
Multimatic® 200 Multiprocess Welder

Lightweight MIG, Stick and DC TIG welder. Impact-resistant case provides durability on the job. This all-in-one multiprocess welder connects to 120 or 230 volt input power. Welds up to 3/8” mild steel.

Features

  • Multiprocess Capabilities - MIG, flux-cored, DC stick and DC TIG processes, allowing you to build your skills.

  • Auto-Set™ Elite - Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use!

  • Inverter Technology - Inverter technology combines best-in-class arc characteristics with the portability of a 29-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.

  • Ultimate Durability - The Multimatic 200's impact-resistant case provides strength and durability, protecting the internal components and welding wire.

  • Excellent Arc Characteristics - Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2.

  • Plugs in Anywhere! - Multi-voltage plug (MVP™) allows you to connect to common 120 or 230 V power receptacles without the use of any tools—choose the plug that fits the receptacle and connect it to the power cord.

  • Simple Aluminum Solutions - Direct-connect spool guns are a reliable and economical solution for welding aluminum.

  • TIG Contractor Kit - The Multimatic 200 DC TIG Contractor Kit gives you everything you need for remote DC TIG welding with the Multimatic 200.

  • Fan-On-Demand - Miller's Fan-On-Demand technology operates only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine.

  • Miller's Auto-Line Technology - Provides state-of-the-art flexibility, automatically connecting to 120 or 230 VAC, single-phase power without removing the cover to re-link the power source. See how it works. 

  • Generator Compatible - The Multimatic 200 will be able to operate and provide full output when powered by generators with 8000 Watt (8K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.

 

INCLUDED

  • Multimatic 200
  • 10-ft. (3 m) MDX™-250 MIG gun
  • 13-ft. (4 m) lead with electrode holder and 25-mm Dinse connector
  • 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector
  • Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose
  • Power cord and MVP plugs for 120 and 240 V
  • Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
  • Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire
  • Material thickness gauge #229895
  • Information/settings chart and quick setup guide

 

PROCESSES

  • Flux Cored (FCAW)
  • MIG (GMAW)
  • Multiprocess
  • Stick (SMAW)
  • TIG (GTAW)
ItemMultimatic® 200 Multiprocess Welder
Industries Interests
Racing / Customizing / Restoring
DIY / Home Hobbyist
Farm and Ranch
Metal Art / Sculptures
Manufacturing
Education / Training
Weldable Metals
Aluminum
Stainless Steel
Steel
Input Voltage
110/115/120 V
220/230/240 V
Input Phase
1-Phase
Input Hz
50/60 Hz
Current Type
DC
Max Open Circuit Voltage
90 VDC
Portability
Handle(s)
Weld Output
CC / CV
Net Width
9.75 in
Net Height
14.5 in
Net Length
17 in
Net Weight
29 lbs

Multimatic® 200 Multiprocess Welder

Lightweight MIG, Stick and DC TIG welder. Impact-resistant case provides durability on the job. This all-in-one multiprocess welder connects to 120 or 230 volt input power. Welds up to 3/8” mild steel.

Features

  • Multiprocess Capabilities - MIG, flux-cored, DC stick and DC TIG processes, allowing you to build your skills.

  • Auto-Set™ Elite - Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use!

  • Inverter Technology - Inverter technology combines best-in-class arc characteristics with the portability of a 29-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.

  • Ultimate Durability - The Multimatic 200's impact-resistant case provides strength and durability, protecting the internal components and welding wire.

  • Excellent Arc Characteristics - Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2.

  • Plugs in Anywhere! - Multi-voltage plug (MVP™) allows you to connect to common 120 or 230 V power receptacles without the use of any tools—choose the plug that fits the receptacle and connect it to the power cord.

  • Simple Aluminum Solutions - Direct-connect spool guns are a reliable and economical solution for welding aluminum.

  • TIG Contractor Kit - The Multimatic 200 DC TIG Contractor Kit gives you everything you need for remote DC TIG welding with the Multimatic 200.

  • Fan-On-Demand - Miller's Fan-On-Demand technology operates only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine.

  • Miller's Auto-Line Technology - Provides state-of-the-art flexibility, automatically connecting to 120 or 230 VAC, single-phase power without removing the cover to re-link the power source. See how it works. 

  • Generator Compatible - The Multimatic 200 will be able to operate and provide full output when powered by generators with 8000 Watt (8K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.

 

INCLUDED

  • Multimatic 200
  • 10-ft. (3 m) MDX™-250 MIG gun
  • 13-ft. (4 m) lead with electrode holder and 25-mm Dinse connector
  • 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector
  • Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose
  • Power cord and MVP plugs for 120 and 240 V
  • Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
  • Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire
  • Material thickness gauge #229895
  • Information/settings chart and quick setup guide

 

PROCESSES

  • Flux Cored (FCAW)
  • MIG (GMAW)
  • Multiprocess
  • Stick (SMAW)
  • TIG (GTAW)

ItemMultimatic® 200 Multiprocess Welder
Industries Interests
Racing / Customizing / Restoring
DIY / Home Hobbyist
Farm and Ranch
Metal Art / Sculptures
Manufacturing
Education / Training
Weldable Metals
Aluminum
Stainless Steel
Steel
Input Voltage
110/115/120 V
220/230/240 V
Input Phase
1-Phase
Input Hz
50/60 Hz
Current Type
DC
Max Open Circuit Voltage
90 VDC
Portability
Handle(s)
Weld Output
CC / CV
Net Width
9.75 in
Net Height
14.5 in
Net Length
17 in
Net Weight
29 lbs

BETTER TOGETHER

This item would go well with:

Price for all 3 Items

$3,205.18

RECENTLY VIEWED