Miller Maxstar 161 STL

TIG/Stick Welder Package 120V/240V

219.14.907710001

$2,485.00

  • STORE PICKUP
  • SHIPPING
2 IN STOCK
Maxstar® 161 STL 120-240 V
Best of class - Provides maximum portability and performance in the most compact TIG/Stick packages in the industry. Dependability and performance all in one machine.


Features

 

  • Use on 120 AND 240 Volt Input Power - Separate 120 and 240 volt power cords disconnect from the rear panel of the machine without the use of any tools to allow your to common 120 and 240 volt power receptacles.  

  • Compact Design Allows for Great Portability - Weighing in at 13 lbs. and featuring a convenient handle/shoulder strap, this little inverter-based TIG/Stick machine can be taken from location to location.


  • Low Power Draw - By utilizing an inverter-based power source in the Maxstar® 161, superior arc starts and excellent weld puddle control are provided in both the TIG and Stick settings - all in a small, light-weight package.


  • Easy-to-Use
    • Turn power on.
    • Select process: Lift-Arc TIG, Stick, or 6010 Stick.
    • Set amperage.

    Then weld! It’s as easy as 1, 2, 3.



    • 6010 Stick Electrode Capability - Superior Stick arc performance even on the difficult-to-run electrodes like E6010.

    • No More "Sticky" Electrodes - With Miller's Adaptive Hot Start™ technology, you no longer have to worry about those difficult-to-strike electrodes.

    • Conserve Your Electrodes - With the Stick-Stuck feature the machine detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode.

    • No Need For A Gas Valve On Your TIG Torch - With a built-in gas solenoid, the Maxstar® 161 eliminates the need for a bulky TIG torch with a gas valve


    • 5 Amp TIG Capability - Allows users to weld thinner materials than other machines in this category.

     

     

    INCLUDED

     

    • Maxstar® 161 STL
    • 6.5 ft. (2 m.) primary cords for 120 V and 240 V
    • 13 ft. (4 m.) stick electrode holder with 25 mm. Dinse-style connector
    • 10 ft. (3 m.) work clamp with 25 mm. Dinse-stlye connector
    • Adjustable handle/shoulder strap
    • Quick Reference Guide

     


    PROCESSES

    • Stick (SMAW)
    • TIG (GTAW)
    • TIG DC (GTAW-DC)

     

    Applications

     

    • Process pipe
    • Dairy industry
    • Food/beverage industry
    • Restaurant/kitchen repair
    • Experimental aircraft
    • Shipboard installation/repair
    • Maintenance repair

     


    ItemTIG Welder
    For Material TypeStainless Steel, Steel
    For Maximum Material Thickness
    3/16 in (Steel)
    For Minimum Material Thickness
    0.020 in (Steel)
    Input Frequency
    50/60 Hz
    Max. Input Current
    23.16 Amps @ 120V (Single-Phase)
    PhaseSingle-Phase
    PolarityDC
    SeriesMaxstar 161 STL
    Stick Welding Maximum Output Current
    160 Amps
    Stick Welding Minimum Output Current
    20 Amps
    Stick Welding Output @ Duty Cycle
    110 Amps @ 24.4 VDC, 100%, 160 Amps @ 26.4 VDC, 20%, 60 Amps @ 22.4 VDC, 100%, 90 Amps @ 23.6 VDC, 30%
    TIG Welding Maximum Output Current
    160 Amps
    TIG Welding Minimum Output Current
    5 Amps
    TIG Welding Output @ Duty Cycle
    110 Amps @ 14.4 VDC, 100%, 130 Amps @ 15.2 VDC, 30%, 160 Amps @ 16.4 VDC, 20%, 90 Amps @ 13.6 VDC, 100%
    Welding Processes
    Stick Welding (SMAW), TIG Welding (GTAW)
    Amperage Range5 Amps to 160 Amps
    ApplicationAerospace, Aluminum Ship Repair, Anodized Aluminum Fabrication, Heavy Fabrication, Pipe and Tube Fabrication, Precision Fabrication
    Color Blue
    FeaturesAuto Line Power Management Technology, Fan-On-Demand(TM), Hot Start(TM), Single Amperage Range, Thermal Overload Protection
    Includes
    10 ft (3 m) work clamp with 25 mm Dinse-style connector, 12.5 ft (3.8 m) Weldcraft A-150 TIG torch, 13 ft (4 m) stick electrode holder with 25 mm Dinse-style connector, AK2C accessory kit, Protective Miller(R) X-Case (301429), Regulator/flow gauge and gas hose
    Imput Voltage110/115/120V AC, 220/230/240V AC
    Model907710001
    Open Circuit Voltage
    48V DC
    Overall Depth
    13.5 in
    Overall Height
    10.3 in
    Overall Width
    5.61 in
    Plug Type
    5-15P
    Power Cord Included 
    Yes
    Power Cord Length
    6 1/2 ft
    Remote Control
    Remote Control Not Included
    Remote Connection Type
    6-Pin (Miller)
    Standards
    CSA, ISO
    TIG Arc Start Feature
    Lift Arc Start
    Weight
    13 lb
    Welding Mode
    CC

    Maxstar® 161 STL 120-240 V
    Best of class - Provides maximum portability and performance in the most compact TIG/Stick packages in the industry. Dependability and performance all in one machine.


    Features

     

    • Use on 120 AND 240 Volt Input Power - Separate 120 and 240 volt power cords disconnect from the rear panel of the machine without the use of any tools to allow your to common 120 and 240 volt power receptacles.  

    • Compact Design Allows for Great Portability - Weighing in at 13 lbs. and featuring a convenient handle/shoulder strap, this little inverter-based TIG/Stick machine can be taken from location to location.


    • Low Power Draw - By utilizing an inverter-based power source in the Maxstar® 161, superior arc starts and excellent weld puddle control are provided in both the TIG and Stick settings - all in a small, light-weight package.


    • Easy-to-Use
      • Turn power on.
      • Select process: Lift-Arc TIG, Stick, or 6010 Stick.
      • Set amperage.

      Then weld! It’s as easy as 1, 2, 3.



      • 6010 Stick Electrode Capability - Superior Stick arc performance even on the difficult-to-run electrodes like E6010.

      • No More "Sticky" Electrodes - With Miller's Adaptive Hot Start™ technology, you no longer have to worry about those difficult-to-strike electrodes.

      • Conserve Your Electrodes - With the Stick-Stuck feature the machine detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode.

      • No Need For A Gas Valve On Your TIG Torch - With a built-in gas solenoid, the Maxstar® 161 eliminates the need for a bulky TIG torch with a gas valve


      • 5 Amp TIG Capability - Allows users to weld thinner materials than other machines in this category.

       

       

      INCLUDED

       

      • Maxstar® 161 STL
      • 6.5 ft. (2 m.) primary cords for 120 V and 240 V
      • 13 ft. (4 m.) stick electrode holder with 25 mm. Dinse-style connector
      • 10 ft. (3 m.) work clamp with 25 mm. Dinse-stlye connector
      • Adjustable handle/shoulder strap
      • Quick Reference Guide

       


      PROCESSES

      • Stick (SMAW)
      • TIG (GTAW)
      • TIG DC (GTAW-DC)

       

      Applications

       

      • Process pipe
      • Dairy industry
      • Food/beverage industry
      • Restaurant/kitchen repair
      • Experimental aircraft
      • Shipboard installation/repair
      • Maintenance repair

       


      ItemTIG Welder
      For Material TypeStainless Steel, Steel
      For Maximum Material Thickness
      3/16 in (Steel)
      For Minimum Material Thickness
      0.020 in (Steel)
      Input Frequency
      50/60 Hz
      Max. Input Current
      23.16 Amps @ 120V (Single-Phase)
      PhaseSingle-Phase
      PolarityDC
      SeriesMaxstar 161 STL
      Stick Welding Maximum Output Current
      160 Amps
      Stick Welding Minimum Output Current
      20 Amps
      Stick Welding Output @ Duty Cycle
      110 Amps @ 24.4 VDC, 100%, 160 Amps @ 26.4 VDC, 20%, 60 Amps @ 22.4 VDC, 100%, 90 Amps @ 23.6 VDC, 30%
      TIG Welding Maximum Output Current
      160 Amps
      TIG Welding Minimum Output Current
      5 Amps
      TIG Welding Output @ Duty Cycle
      110 Amps @ 14.4 VDC, 100%, 130 Amps @ 15.2 VDC, 30%, 160 Amps @ 16.4 VDC, 20%, 90 Amps @ 13.6 VDC, 100%
      Welding Processes
      Stick Welding (SMAW), TIG Welding (GTAW)
      Amperage Range5 Amps to 160 Amps
      ApplicationAerospace, Aluminum Ship Repair, Anodized Aluminum Fabrication, Heavy Fabrication, Pipe and Tube Fabrication, Precision Fabrication
      Color Blue
      FeaturesAuto Line Power Management Technology, Fan-On-Demand(TM), Hot Start(TM), Single Amperage Range, Thermal Overload Protection
      Includes
      10 ft (3 m) work clamp with 25 mm Dinse-style connector, 12.5 ft (3.8 m) Weldcraft A-150 TIG torch, 13 ft (4 m) stick electrode holder with 25 mm Dinse-style connector, AK2C accessory kit, Protective Miller(R) X-Case (301429), Regulator/flow gauge and gas hose
      Imput Voltage110/115/120V AC, 220/230/240V AC
      Model907710001
      Open Circuit Voltage
      48V DC
      Overall Depth
      13.5 in
      Overall Height
      10.3 in
      Overall Width
      5.61 in
      Plug Type
      5-15P
      Power Cord Included 
      Yes
      Power Cord Length
      6 1/2 ft
      Remote Control
      Remote Control Not Included
      Remote Connection Type
      6-Pin (Miller)
      Standards
      CSA, ISO
      TIG Arc Start Feature
      Lift Arc Start
      Weight
      13 lb
      Welding Mode
      CC

      BETTER TOGETHER

      This item would go well with:

      Price for all 3 Items

      $2,608.25

      RECENTLY VIEWED